RUGGEDCOM ROS
User Guide
NOTE
Alarms are volatile in nature. All alarms (active and passive) are cleared at startup.
CONTENTS
•
Section 4.6.1, "Viewing a List of Pre-Configured Alarms"
•
Section 4.6.2, "Viewing and Clearing Latched Alarms"
•
Section 4.6.3, "Configuring an Alarm"
•
Section 4.6.4, "Authentication Related Security Alarms"
Section 4.6.1
Viewing a List of Pre-Configured Alarms
To view a list of alarms pre-configured for the device, navigate to Diagnostic » Configure Alarms . The Alarms
table appears.
Figure 66: Alarms Table
Viewing a List of Pre-Configured Alarms
Chapter 4
System Administration
117