Siemens RUGGEDCOM ROS v4.3 User Manual page 205

RUGGEDCOM ROS
User Guide
1. Navigate to MAC Address Tables » Configure MAC Address Flooding Options . The Flooding Options
table appears.
Figure 116: Flooding Options Table
2. Select a port. The Flooding Options form appears.
3
Figure 117: Flooding Options Form
1. Port(s) Box 2. Flood Unknown Unicast Options 3. Apply Button 4. Reload Button
3. Configure the following parameter(s) as required:
Parameter
Port(s)
Flood Unknown Unicast
4. Click Apply.
Configuring MAC Address Flooding Options
Description
Synopsis: Comma-separated list of ports
The port number as seen on the front plate silkscreen of the
switch (or a list of ports, if aggregated in a port trunk).
Synopsis: { On, Off }
Default: On
Normally, unicast traffic with an unknown destination address is
flooded out of all ports. When a port is configured to turn off this
kind of flooding, the unknown unicast traffic is not sent out from
the selected port.
Chapter 5
Setup and Configuration
1
2
4
189