Deleting An Rmon Alarm - Siemens RUGGEDCOM ROS v4.3 User Manual

RUGGEDCOM ROS
User Guide
Parameter
Falling Event
Owner
4. Click Apply.
Section 3.10.2.3

Deleting an RMON Alarm

To delete an RMON alarm, do the following:
Navigate to Ethernet Stats » Configure RMON Alarms . The RMON Alarms table appears.
1.
Figure 56: RMON Alarms Table
2. Select the alarm from the table. The RMON Alarms form appears.
Deleting an RMON Alarm
Description
The index of the event that is used when a falling threshold is
crossed. If there is no corresponding entryl in the Event Table,
then no association exists. In particular, if this value is zero, no
associated event will be generated.
Synopsis: 0 to 65535
Default: 0
The index of the event that is used when a rising threshold is
crossed. If there is no corresponding entryl in the Event Table,
then no association exists. In particular, if this value is zero, no
associated event will be generated.
Synopsis: Any 127 characters
Default: Monitor
The owner of this record. It is suggested to start this string
withword 'monitor'.
Chapter 3
Device Management
101