Chapter 5
Setup and Configuration
• SNTP (Simple Network Time Protocol) client and server
CONTENTS
•
Section 5.5.1, "Configuring the Time and Date"
•
Section 5.5.2, "Managing NTP"
Section 5.5.1
Configuring the Time and Date
To set the time, date and other time-keeping related parameters, do the following:
1.
Navigate to Administration » System Time Manager » Configure Time and Date . The Time and Date
form appears.
6
Figure 124: Time and Date Form
1. Time 2. Date 3. Time Zone 4. DST Offset 5. DST Rule 6. Apply Button 7. Reload Button
2.
Configure the following parameter(s) as required:
Parameter
Time
Date
Time Zone
194
Description
Synopsis: HH:MM:SS
This parameter allows for both the viewing and setting of the
local time.
Synopsis: MMM DD, YYYY
This parameter allows for both the viewing and setting of the
local date.
Synopsis: { UTC-12:00 (Eniwetok, Kwajalein), UTC-11:00
(Midway Island, Samoa), UTC-10:00 (Hawaii), UTC-9:00
(Alaska), UTC-8:00 (Los Angeles, Vancouver), UTC-7:00 (Calgary,
Denver), UTC-6:00 (Chicago, Mexico City), UTC-5:00 (New York,
Toronto), UTC-4:30 (Caracas), UTC-4:00 (Santiago), UTC-3:30
(Newfoundland), UTC-3:00 (Brasilia, Buenos Aires), UTC-2:00
(Mid Atlantic), UTC-1:00 (Azores), UTC-0:00 (Lisbon, London),
UTC+1:00 (Berlin, Paris, Rome), UTC+2:00 (Athens, Cairo,
Helsinki), ... }
Default: UTC-5:00 (New York, Toronto)
RUGGEDCOM ROS
User Guide
1
2
3
4
5
7
Configuring the Time and Date