Table of Contents
Advertisement
Operation method
For menu operation (Camera Text Menu), refer to page 109.
Remote camera controller [AW-RP50]
TELE
A For operating the Camera Text Menus.
[CAMERA OSD]:
When this is pressed for about 2 seconds, the selected camera menu is displayed, overlapping the camera output
image. When it is pressed for about 2 seconds while a menu is displayed, the menu is exited.
[F1]:
Turn [F1] to move the cursor up and down in the Camera Text Menu or to change setting values. Press [F1] to
move to the next level of a menu item or to change a setting value at the lowest level.
B For selecting the cameras to be operated.
∫ Switching between Day and Night mode
1
Press the [MENU] button on the AW-RP50.
≥ The [MENU] button lights, and the [PRESET MEMORY/MENU] buttons become selectable.
2
Press the [9 (SETUP)] button in the [PRESET MEMORY/MENU] area.
≥ The button lights, and the [SETUP] menu appears on the LCD panel.
3
Turn the [F1] dial to select "FUNCTION", then press the [F1] dial.
≥ Press the [EXIT] button if [FUNCTION] is not displayed.
4
Turn the [F1] dial to select "OPTION".
≥ "Off" or "On" appears on the bottom right (F2 area) of the LCD panel.
5
Turn the [F2] dial to select "Off" or "On", then press the [F2] dial.
[Off]:
Infrared Recording Mode Off
[On]:
Infrared Recording Mode On
≥ If you operate the [IRIS] dial in Manual Iris Mode, the iris is adjusted, while if you operate the dial in Auto Iris Mode,
the setup value of [AE LEVEL] is adjusted.
≥ When one of [IRIS MODE]/[GAIN MODE]/[SHUTTER MODE] is set to [AUTO], even if you adjust the iris/gain/
shutter speed, the brightness may not change.
POWER
ALARM
1
MENU
PAGE
GAIN/PED
R/B GAIN
6
STORE
DELETE
DETAIL
SCENE/MODE
1
IRIS
AUTO
CAMERA STATUS / SELECTION
AUTO
ZOOM
WIDE
FOCUS/PUSH OAF
F1
F2
2
3
4
5
R/B PED
AWB/ABB
SHUTTER
7
8
9
10
CAMERA
SETUP
SYSTEM
PRESET MEMORY / MENU
2
3
4
5
LOW
HI
PTZ/FOCUS SPEED
- 111 -
F1
CAMERA
OSD
F2
EXIT
USER1
USER2
PT ACTIVE
Advertisement
Table of Contents
