Panasonic AG-UMR20P Operating Instructions Manual page 135

1 Connected device information
[Compact Camera Head AG-UCK20] is displayed when the web screen is displayed in CAM Mode, while
[Memory Card Portable Recorder AG-UMR20] is displayed when the screen is displayed in SDI Mode.
2 Camera title information
The name set in [Camera title] on the Basic screen [Basic]
3 Menu switching [Other Menu >>]/[Stream Menu >>]
Switch between menu displays.
Clicking [Other Menu >>] when the Stream menu is displayed displays the Other menu.
Clicking [Stream Menu >>] when the Other menu is displayed displays the Stream menu.
≥ The Stream menu is always displayed when the web screen is updated and the Live screen is displayed from
another screen. However, this is not the case when recording to an SD card.
4 Multi-screen list box [Multi-screen]
≥ The live screen [Live] display method is selected here.
5 Compression buttons [Compression]
When selected, the text on the button turns green, and H.264 images are displayed.
The [H.264] button is enabled when the [H.264 transmission] setting of [H.264(1)] to [H.264(2)]
on the Video over IP is [On].
When selected, the text on the button turns green, and JPEG images are displayed.
≥ The [H.264] button is not displayed when [PRIORITY MODE] is set to [IP(4K)] or [REC/PB(4K)].
≥ In the following cases, the selection status of the [Compression] buttons will return to the setting configured in
the [Video over IP] tab - [Initial display settings for "Live" page] - [Stream].
j When returning from another screen
j When the screen is updated
Displays the IP image of the Camera Head or the unit.
Multiple IP images can be viewed on a single screen by selecting the devices for
multi-screen display (Camera Heads/Recorders) beforehand in the multi screen
setup screen [Multi-screen]
(l 149)
- 135 -
(l 145) is displayed.
(l 163). (Multi display mode)