Panasonic AG-UMR20P Operating Instructions Manual page 68

<ATW LOCK>
≥ Register <ATW LOCK> to a USER button.
This sets the White Balance mode to [ATW LOCK].
<BACKLIGHT>
≥ Register <BACKLIGHT> to a USER button.
≥ Set to Auto Mode (l
208)
Switches to automatic control to compensate the backlight.
This makes the image brighter to prevent darkening of a backlit subject.
<SPOTLIGHT>
≥ Register <SPOTLIGHT> to a USER button.
≥ Set to Auto Mode (l
208)
Switches to automatic control for spotlight.
Very bright object is recorded clearly.
<D.ZOOM>
≥ Register <D.ZOOM> to a USER button.
Uses the digital zoom.
∫ To change the zoom magnification of Digital Zoom
The zoom magnification of Digital Zoom varies depending on the [D.ZOOM RATIO] setting.
: [SW SETUP] # [D.ZOOM RATIO] # desired setting
[k1.4] (1.4k)/[k2] (2k)/[k4] (4k)/[k6] (6k)/[k8] (8k)
≥ When using Digital Zoom, the larger you set the zoom magnification, the lower the picture quality becomes.
≥ Digital Zoom is not possible in following cases:
j During Freeze Frame
≥ This function is canceled when the unit is turned off.
<DRS>
≥ Register <DRS> to a USER button.
Switches the on/off of the DRS (Dynamic Range Stretcher) function.
It is possible to expand the dynamic range by compressing the video signal level of the highly illuminated area that
gets washed out with standard recording.
≥ If this item is switched on, the previous setup value of the [DRS] menu (one of [LOW]/[MID]/[HIGH]) will be set.
(l 206)
<SUPER GAIN>
≥ Register <SUPER GAIN> to a USER button.
≥ Switch to Manual Mode.
This changes the gain value to a [SUPER GAIN EFFECT] value.
(l
(l
43) or set one of [IRIS MODE], [GAIN MODE] or [SHUTTER MODE] to [AUTO]
(l
43) or set one of [IRIS MODE], [GAIN MODE] or [SHUTTER MODE] to [AUTO]
(l 55)
(l 65)
(l 69)
(l 65)
(l 43)
65)
(l 53)
65)
(l
65)
(l 65)
(l 57)
- 68 -
55)
(l 207,
(l 207,