Table of Contents
Advertisement
∫ For the purposes of these operating
instructions
≥ The battery pack is referred to as the "Battery".
≥ SDHC Memory Card and SDXC Memory Card are
referred to as the "SD card".
≥ Function that can be used for CAM Mode:
Function that can be used for SDI Mode:
Function that can be used for Playback Mode:
≥ An image created by one recording operation is called
a "Clip" and is described as such.
≥ The Compact Camera Head (AG-UCK20G) sold
separately is described as "Camera Head".
≥ Clip(s) to be recorded or that was recorded with
[PRIORITY MODE] set to [REC/PB(4K)] →"MP4
clip(s)"
≥ Clip(s) to be recorded or that was recorded with
[PRIORITY MODE] set to [REC/PB] →"AVCHD clip(s)"
≥ Notation of < > indicates the setup item name of the
USER button that can be set with the menu of [USER
SW]→[USER1] to [USER13].
≥ Pages for reference are indicated by an arrow, for
example: l 00
≥ For the purposes of this manual, the model numbers of
the units are given as listed in the table below.
Model number of unit
AG-UMR20P
AG-UMR20E
AW-RP50N
AW-RP120G
AK-HRP200G
≥ Functions which can be used by Windows only are
indicated using the
≥ These operating instructions are designed for use with
models AG-UMR20P/AG-UMR20E. The illustrations
and screen examples used in this document are of the
AG-UMR20P.
SDI
Model number given in
manual
AG-UMR20
AW-RP50
AW-RP120
AK-HRP200
mark.
∫ About Condensation
(When the lens of the Camera Head or
the LCD monitor of this unit becomes
cloudy)
Condensation occurs when there is a change in
temperature or humidity, such as when the unit is taken
from outside or a cold room to a warm room. Please be
careful, as it may cause the lens, the viewfinder or LCD
monitor to become soiled, moldy, or damaged.
When taking the unit to a place which has a different
temperature, if the unit is accustomed to the room
temperature of the destination for about one hour,
condensation can be prevented. (When the difference in
temperature is severe, place the unit in a plastic bag or
the like, remove air from the bag, and seal the bag.)
When condensation has occurred, remove the battery
and/or the AC adaptor and leave the unit like that for
about one hour. When the unit becomes accustomed to
the surrounding temperature, fogginess will disappear
naturally.
- 14 -
Advertisement
Table of Contents
