Table of Contents
Advertisement
∫ Setting the Connection Method [Connection]
1
Set the method to access the Camera Head or this unit in [Connection].
HTTP
Only HTTP connection is possible.
HTTPS
Only HTTPS connection is possible.
≥ When using an HTTPS connection, network connection with the AW-RP50, AW-RP120, and AK-HRP200 will
be disabled.
2
Set the Port No. to be used with HTTPS in [HTTPS Port].
≥ Port Nos. that can be selected: 1 to 65535
The following port numbers are used by the unit so they cannot be used.
20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 554, 995, 10669, 10670, 59000 to 61000
Factory settings: 443
3
Click the [Set] button.
≥ The Camera Head or this unit restarts and access to the Camera Head or this unit via HTTPS is enabled.
≥ This unit will restart if the connection method is changed.
≥ Using a self-signed certificate
A warning screen is displayed when accessing the Camera Head or this unit by HTTPS for the first time. Install the
self-signed certificate (security certificate) in your personal computer in accordance with the screen instructions.
(l
180)
≥ Using a server certificate
Install the Certificate Authority (CA) root certificate or intermediate certificate in your web browser in advance.
Follow the Certificate Authority (CA) procedures to acquire and install root certificates and intermediate certificates.
≥ When accessing the Camera Head or this unit by HTTPS, the image display speed and frame rate of the moving
image may reduce.
≥ When accessing the Camera Head or this unit by HTTPS, it may take some time for the images to be displayed.
≥ When accessing the Camera Head or this unit by HTTPS, images may be disturbed and sound may be interrupted.
≥ The maximum number of Camera Heads or units that can be connected simultaneously depends on the maximum
image size and distribution format.
∫ Accessing the Camera Head or this unit by HTTPS
1
Launch the web browser in your personal computer.
2
Enter the IP address of the Camera Head or the unit in the address bar of the web browser.
≥ Example of input: https://192.168.0.10/
≥ When the HTTPS port No. is changed from "443", enter "https://<IP address of the Camera Head or the
unit>:<Port No.>" in the address bar.
E.g. https://192.168.0.11:61443
≥ When this unit is in a local network, set a proxy server from the web browser (menu bar: [Tools] -
[Internet Options]) to ensure that a proxy server is not used for a local address.
3
Press the [Enter] key.
≥ The Live screen is displayed.
≥ The security certificate is installed when the security warning screen is displayed.
≥ When [User auth.] is set to [On], the user name and password input screen is displayed before the live screen
appears.
≥ When HTTPS is used, screen and image display may slow down and image update interval (frame rate) may also
slow down.
- 179 -
(l
180)
Advertisement
Table of Contents
