Using The User Button - Panasonic AG-UMR20P Operating Instructions Manual

Using the USER button

Either press the set USER1 button or touch the USER 2 to 13 USER button icons while the operation icons are
displayed.
(When you use the USER1 button)
≥ The USER button icon (USER2 to 13) assigned as <INHIBIT> is not displayed in the screen.
≥ To cancel, press the USER button or touch the USER button icon again.
For canceling or using of the following functions for the USER buttons, refer to each page.
j <REC CHECK> (l
j <LAST CLIP DEL>
j <ZEBRA> (l 72)
(When using USER2 to 13 buttons)
≥ If the screen is touched while the operation icons are displayed, or if there is no touch operation for a period of time,
the operation icons will disappear. To display again, touch the screen.
≥ The display duration of operation icons can be changed in [OPERATION ICONS DISPLAY].
∫ Switch display/not-display of the USER buttons
Display/not-display of the USER button icons in the LCD monitor can be switched.
Select the menu.
: [USER SW] # [USER BUTTON DISPLAY] # [ON] or [OFF]
∫ Check the setting of the USER buttons
To confirm the setup of the USER1 button, press and hold the USER button assigned as <DISP/MODE CHK>, or
touch and hold the USER button icon to display the Mode information display.
71)
(l 71)
(When you use the USER2 to USER13 button)
[USER2]
[USER3]
[USER4]
[USER5]
[USER6]
[USER7]
j <SCENE FILE>
j <REMOTE REC>
j <D.ZOOM> (l
(l
- 66 -
[USER13]
[USER12]
[USER11]
[USER10]
[USER9]
[USER8]
(l 70)
(l 71)
68)
(l 225)
74)