Using The Push Auto Function - Panasonic AG-UMR20P Operating Instructions Manual

Using the PUSH AUTO function

Auto High-Speed Focus
≥ Switch to Manual Focus Mode.
Press the button while pressing and holding the SHIFT button.
≥ Auto Focus will be activated and the camera will perform high-speed focusing until the image is focused.
≥ The focus setting returns to Manual Focus Mode once the image is focused or a certain time has elapsed.
Set to Auto Focus temporarily
≥ Switch to Manual Focus Mode.
Press and hold the
≥ After Auto Focus is activated and Auto High-Speed Focus is performed, the focus point automatically tracks the
focused subject at the center of the screen.
≥ Auto Focus will be canceled when the button is released, but the focus position set by Auto Focus will be
maintained.
≥ It is also possible to use the PUSH AUTO function with the USER button assigned as <PUSH AUTO>.
≥ The PUSH AUTO function will not operate in the following cases.
j When Auto Focus is used
(l 48)
(l 48)
button while pressing and holding the SHIFT button.
- 50 -
(l 65)