Table of Contents
Advertisement
Example of images with a [16:9] aspect ratio on an external monitor (4:3):
[DOWN CONV.] setting
[LETTERBOX]
≥ When [DOWN CONV.] is set to [SIDE CROP], the sides of an image will be cut off, causing some icons on the
external monitor to be hidden from the external monitor screen.
∫ To display the on-screen information on the external monitor
When the menu setting is changed, the information displayed on the screen (operation icon and Counter display etc.)
can be displayed/not displayed on the external monitor.
: [OUTPUT SETUP] # [CHAR OUTPUT] # [ON] or [OFF]
≥ This item is set to [OFF] in the following situations when this unit is in Recording Mode:
j During remote recording
Switching the output setup of the SDI Mode
Set [SDI MODE SEL] to switch the output method of the SDI OUT terminal.
Select the menu.
: [OUTPUT SETUP] # [SDI MODE SEL] # desired setting
(During CAM Mode)
[THROUGH]:
[NORMAL]:
(During SDI Mode)
[THROUGH]:
[NORMAL]:
≥ Set to [THROUGH] when recording or editing is required in the external device connected to the SDI OUT terminal.
≥ Even when [THROUGH] is set, depending on the unit's recording or IP streaming settings, data input from the
SDI IN terminal may not be output to the SDI OUT terminal.
[SQUEEZE]
(l
71, 219)
The Camera Head image can be output with less time lag with this setting than with
[NORMAL].
It is not possible to output menus, characters, and TC/UB information and control
recording performed with an external device.
Menus and characters can be output to the Camera Head image as superimposed text.
It is possible to output TC/UB information and control recording performed with an
external device.
SDI input signals can be output without time lag or signal degradation.
It is not possible to output menus and characters.
The input signal determines whether or not TC/UB information can be output and
recording performed with an external device can be controlled.
SDI input signals can be converted before being output to suit output formats
It is possible to output and superimpose menus and characters and control recording
performed with an external device.
It is not possible to output TC/UB information.
- 94 -
Advertisement
Table of Contents
