Table of Contents
Advertisement
Recording
Image stabilization
Blurring of image can be decreased by the image stabilization.
Optical image stabilization (O.I.S.) or hybrid image stabilization (Hybrid O.I.S.) can be used.
Hybrid image stabilization is the image stabilization using both optical and electronic image stabilization.
1
Register <O.I.S.> to a USER button.
2
Switch on/off the image stabilization by pressing the USER button assigned as <O.I.S.>, or
touching the USER button icon.
/
!#
≥ You can also access this function by selecting menu items.
[SW SETUP] # [O.I.S.] # [ON]/[OFF]
≥ When [HYBRID O.I.S. MODE] is [ON],
∫ To switch the image stabilization mode
Select the menu.
: [SW SETUP] # [HYBRID O.I.S. MODE] # desired setting
[ON]:
[OFF]:
≥ The angle of view will change if you select [ON].
≥ It will be set to [OFF] in the following cases, and the setup cannot be changed.
j When [PRIORITY MODE] is set to [REC/PB(4K)] or [IP(4K)]
∫ Custom O.I.S. setup
The image stabilization effect can be switched depending on the recording style.
Select the menu.
: [SW SETUP] # [CUSTOM O.I.S. SETUP] # desired setting
[NORMAL]:
[STATIONARY]:
≥ Stabilization may not be possible under strong shaking conditions.
≥ When using a tripod, we recommend that you set the Image Stabilizer to
≥ Compared to O.I.S., Hybrid O.I.S. can produce stronger compensation.
Hybrid O.I.S. performs compensation (electronic) on movement detected in the video signal. As a result, depending
on the recording conditions, it may perform compensation without differentiating between movement of the subject
and movement of the unit.
≥ On/off of the image stabilization, and setup of [HYBRID O.I.S. MODE] or [CUSTOM O.I.S. SETUP] cannot be
changed in the following cases.
j During Freeze Frame
j During REC check
(OFF)
Use the image stabilization (hybrid O.I.S.: 5-axis correction) function.
Use the image stabilization (O.I.S.: 2-axis correction) function.
The setup appropriate for general shaking such as handheld.
Use this setup for stronger stabilization.
The setup appropriate for shaking of the building when fixed to a ceiling or when a camera
platform is used.
Use this setup to suppress unwanted stabilization triggered by panning/tilting, etc.
(l
69)
(l
71)
(l
65)
is displayed. When [OFF],
- 47 -
is displayed.
(setting canceled).
Advertisement
Table of Contents
