Table of Contents
Advertisement
Recording
Counter display
You can change a counter display that indicates how much time has elapsed during recording or playback.
Switch the counter display by pressing the USER button assigned as <COUNTER>, or touching
the USER button icon.
≥ Please refer to page
65
≥ The display will be switched in the following order: TC # UB
Counter display
TC (Time Code)
UB (User Information)
REC COUNTER
(Recording Counter)
(l
* This is displayed only when [PRIORITY MODE] is set to [REC/PB] or [IP].
≥ It is also possible to switch the counter display by the menu setup.
[DISP SETUP] # [COUNTER]
Setting the Time Code
Time code will display the recording time in hours, minutes, seconds, and frames.
TC 00:00:00:00 (hour: minute: second: frame [NDF])
TC 00:00:00.00 (hour: minute: second. frame [DF])
≥ The number of frames (frame count per second) varies depending on the frame rate in [REC FORMAT].
Frame rates
59.94p/59.94i/29.97p
50.00p/50.00i/25.00p
23.98p
for details about setting the USER button.
TC 00:00:00:00 or TC 00:00:00.00
≥ Display will change depending on the setting of the [DF MODE].
*
(l
64)
UB 00 00 00 00
(In Recording Mode)
64)
0:00:00 or CLP 0:00:00
(In Playback Mode)
CLP 0:00:00
≥ The display format used in Recording Mode is determined by the
[REC COUNTER] setting.
≥ In Playback Mode, the counter is reset to [CLP 0:00:00] for every clip.
*
# Recording Counter # Off.
Indications
(l
Frame
0 to 29
0 to 24
0 to 23
- 62 -
(l
32)
63)
(l
212)
Advertisement
Table of Contents
