Table of Contents
Advertisement
9
Power ON button [Power ON]/Standby button [Standby]
Turn the unit on.
Set the unit to Standby mode.
In the Standby mode, all the buttons on the live screen [Live] except for the [Multi-screen] list box and the [Power
ON] button are disabled.
≥ If [Power ON] or [Standby] is selected too quickly, the status selected and the display shown may not
correspond. In a case like this, follow the steps below to restore the correct status display:
For Windows:
Press the [F5] key on the keyboard of the personal computer.
For Mac:
Press the [Command] + [R] keys on the keyboard of the personal computer.
10
Operation lock button [Op. Lock]
Locks the operation of the zoom, focus, brightness, Iris Mode, Gain Mode, Shutter Mode, White
Balance, ND Filter, and Select Scene in the control screen.
Use this also to lock the Other menu operations and [Power ON] button/[Standby] button to
prevent operations from being performed by accident.
11
Main area (IP video display area)
The IP image of the unit is displayed.
Operating the mouse wheel inside the display area
allows you to use the plug-in viewer software's digital
zoom.
12
Zoom [Zoom]
Use this to enable or disable the digital zoom
Use this to adjust the zoom (magnification) to 1.0k.
Use this to adjust the zoom (magnification) in the Wide direction.
Use this to adjust the zoom (magnification) in the Tele direction.
13
Focus [Focus]
Use this to switch between auto and manual focusing.
When Auto (
When this is pressed while the focus is being adjusted manually, the focus will be temporarily
adjusted automatically. It is disabled when Auto is selected.
Use this to adjust the focus in the near ([Near]) direction.
Use this to adjust the focus in the far ([Far]) direction.
) is selected, the focus is adjusted automatically.
- 137 -
Advertisement
Table of Contents
