Panasonic AG-UMR20P Operating Instructions Manual page 150

Frame rate
Set the frame rate for H.264 images.
Setting value:
(When [SYSTEM FREQ] is set to [59.94Hz])
5fps, 15fps, 30fps, 60fps
(When [SYSTEM FREQ] is set to [50.00Hz])
5fps, 12.5fps, 25fps, 50fps
Factory settings:
(When [SYSTEM FREQ] is set to [59.94Hz])
30fps
(When [SYSTEM FREQ] is set to [50.00Hz])
25fps
≥ When 3840k2160/30fps, 3840k2160/25fps, 1920k1080/60fps or 1920k1080/50fps is used, the setting becomes
only H.264(1).
≥ When the image resolution is "3840k2160" or "640k360", 60fps or 50fps cannot be selected for the frame rate.
Max bit rate (per client)
Specify the H.264 bit rate per client.
When [Transmission priority] is set to [Best effort], specify the maximum and minimum bit rate.
Setting value:
512kbps, 768kbps, 1024kbps, 1536kbps, 2048kbps, 3072kbps, 4096kbps, 6144kbps, 8192kbps, 10240kbps,
12288kbps, 14336kbps, 16384kbps, 20480kbps, 24576kbps, 32768kbps
*1 The H.264 bit rate is limited by the [Bandwidth control (bitrate)]
network setup screen [Network]. The actual bit rate may be lower than the specified value.
*2 When [IP(4K)] is selected as for the [Priority Mode], this value is fixed to support the frame rate.
Factory settings:
H.264(1): 14336kbps
H.264(2): 8192kbps
The range of H.264 bit rates that can be specified varies depending on the resolution.
(When [SYSTEM FREQ] is set to [59.94Hz])
Image capture size
3840k2160
1920k1080
1280k720
640k360
*1
Frame rate
30fps
15fps
5fps
60fps
5fps, 15fps, 30fps
60fps
5fps, 15fps, 30fps
- 150 -
*2 *2
, 40960kbps , 51200kbps
(l 168) setting under the [Network] tab of the
H.264 bit rate
51200kbps fixed
40960kbps fixed
32768kbps fixed
16384kbps to 24576kbps
1024kbps to 14336kbps
3072kbps to 14336kbps
512kbps to 8192kbps
512kbps to 4096kbps
*2