Panasonic AG-UMR20P Operating Instructions Manual page 193

Memory card portable recorder
Hide thumbs Also See for AG-UMR20P:
Table of Contents

Advertisement

Operations for recording to an SD card
Perform the operations for recording the video and audio captured with the unit to an SD card.
These buttons are displayed at the bottom of the screen only when the priority mode
"REC/PB(4K)".
Starts recording to an SD card.
When this operation is performed,
Stops recording to an SD card.
When this operation is performed,
≥ If the HTTP port number has been changed from "80", enter "http://<IP address>:<port number>/mobile/" to specify
the unit's port number.
≥ When the authentication dialog box appears, enter the user name and password of an administrator or general user.
Depending on the mobile terminal, password entry may be required when transitioning between each screen.
≥ Audio cannot be received on mobile terminals.
≥ If the [User auth.]
(l
screen is displayed, it may not be possible to refresh the mobile terminal screen. In a case like this, first close the
web browser which is running on the mobile terminal, and then open the mobile terminal screen again.
≥ If, when using an Android terminal, more than one button is pressed at the same time, one of the buttons may
remain pressed even after it has been released. At a time like this, press again only that button that has remained
pressed to release it.
(Example) When the zoom buttons
them remains depressed, and as a result, zooming does not stop.
→ Press the button that remains depressed (
164) setting has been changed to [On] from a personal computer while the mobile terminal
and
is displayed.
disappears.
are pressed simultaneously, even if you release them, either of
or
button) again to stop zooming.
- 193 -
(l
32, 144) is set to "REC/PB" or

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ag-umr20e

Table of Contents