Operation error
Error code
Description
(SD0)
3400H
An invalid operation (such as division by zero) is performed.
3402H
Input data (PVP), operation constant (MTD, DVLS, PN, SVPTN_B0, NMAX, NMIN), or tag data is a subnormal number or NaN (not a
number).
3403H
An overflow has occurred.
3405H
The control cycle (CT) setting is less than 0.
The execution cycle (T) setting is less than 0.
The value divided the control cycle (CT) by the execution cycle (T) exceeds 32767.
10 LOOP CONTROL OPERATION
242
10.10 Position Type PID Control (Disable Tracking for primary loop/Disable Tracking from secondary loop) (M+P_PIDP)