Chapter 3 Lists Of Process Control Function Block; General Process Fbs - Mitsubishi Electric MELSEC iQ-R Series Programming Manual

3
LISTS OF PROCESS CONTROL FUNCTION
BLOCK
How to read the lists is shown below.
Item
Function block symbol
Processing details
Reference
• For instructions for the CPU module, dedicated instructions for the intelligent function modules, and
standard functions/function blocks, refer to the following.
 MELSEC iQ-R Programming Manual (Instructions, Standard Functions/Function Blocks)
• For module FBs specific to each module, refer to the following.
 Function Block Reference for the module used
3.1

General Process FBs

Analog Value Selection/Average
The following FBs output the maximum, minimum, middle, average, and absolute values of input values.
■High Selector
Function block symbol
M+P_HS(_E)
■Low Selector
Function block symbol
M+P_LS(_E)
■Middle Value Selection
Function block symbol
M+P_MID(_E)
■Average Value
Function block symbol
M+P_AVE(_E)
■Absolute Value
Function block symbol
M+P_ABS(_E)
3 LISTS OF PROCESS CONTROL FUNCTION BLOCK
44
3.1 General Process FBs
Description
A function block name is shown.
An overview of the function blocks is explained.
Indicates the reference of detailed information.
Processing details
Outputs the maximum value of input values (array).
Processing details
Outputs the minimum value of input values (array).
Processing details
Outputs the middle value of input values (array).
Processing details
Outputs the average value of input values (array).
Processing details
Outputs the absolute value of input values.
Reference
Page 60 M+P_HS(_E)
Reference
Page 62 M+P_LS(_E)
Reference
Page 64 M+P_MID(_E)
Reference
Page 66 M+P_AVE(_E)
Reference
Page 68
M+P_ABS(_E)