Mitsubishi Electric MELSEC iQ-R Series Programming Manual page 58

■Loop Selector (Enable Tracking for primary loop by CASIN_T1/_T2)
Function block symbol
M+M_SEL_T2
■Loop Selector (Enable Tracking from secondary loop to primary loop)
Function block symbol
M+M_SEL_T3_
■Manual Output
Function block symbol
M+P_MOUT
■Program Setter
Function block symbol
M+M_PGS
■Multi-Point Program Setter
Function block symbol
M+M_PGS2_
■Manual Setter with Monitor
Function block symbol
M+M_SWM_
■Position Proportional Output
Function block symbol
M+M_PVAL_T_
■Heating and Cooling Output
Function block symbol
M+M_HTCL_T_
3 LISTS OF PROCESS CONTROL FUNCTION BLOCK
56
3.3 Tag FBs
Processing details
Performs loop selector combining the functions of M+P_SEL_T2 into a single FB. The primary loop
of the input 1 and 2 is tracked, but tracking from the secondary loop is not performed.
Processing details
Performs loop selector combining the functions of M+P_SEL_T3_ into a single FB. The primary
loop of the input 1 and 2 can be tracked from the secondary loop.
Processing details
Performs manual output combining the functions of M+P_MOUT into a single FB.
Processing details
Performs program settings combining the functions of M+P_PGS into a single FB.
Processing details
Performs program settings combining the functions of M+P_PGS2_ into a single FB. Multiple FBs
can be connected to execute time width sets and setting value programs of 32 steps or more.
Processing details
Performs manual settings with monitor combining the functions of M+P_IN, M+P_PHPL, and
M+P_MSET_ into a single FB.
Processing details
Outputs open/close command bits to operate the motor valve opening according to the deviation of
opening between the feedback input and setting value. The primary loop can be tracked.
Processing details
Outputs two manipulated values after split conversion and output conversion to setting values. This
function block can perform temperature control by outputting the values to both the heating and
cooling operation terminal. The primary loop can be tracked.
Reference
Page 420
M+M_SEL_T2
Reference
Page 422
M+M_SEL_T3_
Reference
Page 424 M+M_MOUT
Reference
Page 426 M+M_PGS
Reference
Page 428
M+M_PGS2_
Reference
Page 432 M+M_SWM_
Reference
Page 434
M+M_PVAL_T_
Reference
Page 442
M+M_HTCL_T_