Mitsubishi Electric MELSEC iQ-R Series Programming Manual page 453

■Processing operation
: Performed, : Not performed
Control Processing operation
mode
Split conversion

MAN, CMV
AUT 

CAS, CSV
Control Processing operation
mode
Auto tuning result
reflection
MAN, CMV 

AUT
*4
CAS, CSV 
*1 Tracking is performed when the tracking flag (TRK) is 1.
*2 An alarm (ALM) whose corresponding bit is TRUE (detected) is reset, and the alarm will not be detected.
*3 An alarm whose corresponding bit is TRUE (Valid) in the disable alarm detection (INH) is not detected.
*4 This function is performed only in the CAS mode.
Operation error
Error code Description
(SD0)
3400H An invalid operation (such as division by zero) is performed.
3402H Input data (NMAX_HT, NMIN_HT, MV_HT, NMAX_CL, NMIN_CL, MV_CL) or tag data is a subnormal number or NaN (not a number).
3403H An overflow has occurred.
Variation rate & Tight shut/full
high/low limiter open
 
 
 
Tracking of PID Alarm
parameters
*2
 
*3
 
*3
 
MV reverse Tracking
*1
 
*1
 
 
Heater burnout
notification



12.40 Heating and Cooling Output (M+M_HTCL_T_)
Output
conversion



Temperature error
detection in the
12
primary loop



12 LOOP TAG
451