Mitsubishi Electric MELSEC iQ-R Series Programming Manual page 435

■Public variable (operation constant)
Variable name Description
IN_NMAX Input High Limit
IN_NMIN Input Low Limit
IN_HH High Limit Range Error
IN_H High Limit Range Error Reset
IN_L Low Limit Range Error Reset
IN_LL Low Limit Range Error
MSET_SVPTN_B0 Setting Value (SV) Used
MSET_SVLMT_EN SV High/Low Limiter
MSET_DVLS Large Deviation Alarm Hysteresis
MSET_PN Reverse Action/Direct Action
*1 When SVPTN_B0 is TRUE, CASIN inputs cannot be used even though the mode is changed to the CAS mode.
■Public variable (others)
• Control mode change processing (MCHG function)
Variable name Description
MODEIN Mode Change Signal
E_ Enable Mode Change
*1 Read or write the variables using a program. They are not displayed on "FB Property" of the engineering tool.
■Tag data
For details on tag data that is read or written with this tag FB, refer to the following.
Page 535 SWM
Processing details
This tag FB consists of the following function blocks.
Item
IN function
PHPL function
MSET function
MCHG function
Operation error
An error may occur in a function block that is used in a tag FB. For details on the error, refer to corresponding function blocks.
Recommended range
-999999 to 999999
-999999 to 999999
-999999 to 999999
-999999 to 999999
-999999 to 999999
-999999 to 999999
*1
TRUE: Not used
FALSE: Used
TRUE: Execute
FALSE: Not execute
0 to 100
0: Reverse action
1: Direct action
*1
Recommended range
1 to 3, 5
1: MAN
2: AUT
3: CAS
5: CSV
TRUE: Execute
FALSE: Stop
Function block
M+P_IN
M+P_PHPL
M+P_MSET_
M+P_MCHG
Initial value Set by
100.0 User
0.0 User
102.0 User
100.0 User
0.0 User
-2.0 User
TRUE User
FALSE User
0 to 100 User
0 to 1 User
Initial value Set by
0 User
FALSE User
Reference
Page 144 M+P_IN
Page 291 M+P_PHPL
Page 179 M+P_MSET_
Page 338 M+P_MCHG
12.38 Manual Setter with Monitor (M+M_SWM_)
Data type
REAL
REAL
REAL
REAL
REAL
REAL
BOOL
BOOL
12
REAL
INT
Data type
INT
BOOL
12 LOOP TAG
433