Output Processing-3 With Mode Switching (With Input Addition And Compensation); M+P_Out3 - Mitsubishi Electric MELSEC iQ-R Series Programming Manual

9.4
Output Processing-3 with Mode Switching (With
Input Addition and Compensation) (M+P_OUT3_)

M+P_OUT3_

This FB performs input addition, MV compensation, preset MV, MV hold, MV tracking, variation rate & high/low limiter, reset
windup, tight shut/full open, MV reverse, and output conversion processing to an input value (MV) and outputs a
manipulated value.
FBD/LD
M+P_OUT3_
MVD
CASOUT
CASDR_MVIN
CASOUT_T
Applicable tag type
2PIDH
Control mode
MAN

*1 Transition to CASDR is possible.
■Block diagram
ΔMV=0
AUT,
CAS,
CSV
(%)
MVD
TRKF=0
MAN,
CMV
AT(AT2)
CASDR_
(%)
MVIN
Tag data
TRKF (*)
Secondary
loop tag
SV (%)
* Indicates bits item.
9 I/O CONTROL
158
9.4 Output Processing-3 with Mode Switching (With Input Addition and Compensation) (M+P_OUT3_)
MVN
AUT

TRKF=1
Output for MV compensation
Input MV
addition
compensation
Variation rate
high/low limiter
Disable alarm detection
MVP MHA (*) MLA (*) DMLA (*)
INH ALM
AUT, SV (%) tracking
MAN, (when the secondary loop control mode is AUT/MAN/CMV)
CMV
CAS,
CSV
*1
CAS

M+P_OUT3_
Cascade
MV MV
direct tracking
hold
Reset
windup
MAN,
AUT,
CMV
CAS,
AT(AT2)
CSV
TRKF=1
TRKF=0
CMV

NOR,
OVR
(MV output)
Preset Output
MV
conversion
SIM
SIMOUT
(Simulation output)
MV
reverse
Tight
shut/full open
(Tracking)
MV
CSV

MVN
(%) CASOUT
(%)
CASOUT_T