Toshiba TOSVERT VF-AS3 Instruction Manual page 154

11 Select "10: Touch wheel 1 (power off or press OK
to save)" and press the [OK] key.
The basic parameter screen is displayed.
Check that the setting value of <FMOd: Frequency
command select 1> is "10".
12 Press the [ESC] key or [F1] to [F4] keys to switch
to the [Standard mode] screen.
13 In [Standard mode], press the [OK] key.
The setting screen of <FC: Panel run frequency> is
displayed.
If you leave this setting screen as it is, the screen
returns to the [Standard mode] screen for a few
4
seconds later.
14 Change the frequency command value with the
touch wheel.
When the setting value is changed, the value on
the lower side of the screen is highlighted.
In the example on the right, it is set to 30.0 Hz. This
9
becomes the frequency command value.
15 Press the [OK] key.
The screen returns to the [Standard mode] screen.
4. [Basic operation] Operation methods of motor
: Run command select
CMOd
: Frequency command select 1
FMOd
: V/f Pattern
Pt
: Manual torque boost 1
vb
: Base frequency 1
vL
FC
Output frequency
Min: 0.0
X1000
FC
Output frequency
Min: 0.0
X1000
Easy
4-30
E6582062
STOP 0.0Hz F R
15:17
Basic parameters
0
10
0
4.80%
60.0Hz
STOP 0.0Hz F R
15:53
:Panel run frequency
0.0Hz
20.0Hz
Max: 60.0
X100 X10 X1
STOP 0.0Hz F R
15:28
:Panel run frequency
0.0Hz
30.0Hz
Max: 60.0
X100 X10 X1
STOP 0.0Hz F R
14:47
Standard Mode
0.0
Hz
Screen Copy Monitor