Toshiba TOSVERT VF-AS3 Instruction Manual page 236

5. 4. 3
(1) Selecting contents displayed in [Standard mode]
<F710: Standard mode display>
<F720: Standard mode display of extension
panel>
■ Function
4
The display contents in [Standard mode] can be changed. Different contents can be displayed on
the operation panel of the inverter unit and the extension panel (optional).
5
Select the display contents in [Standard mode] when the power is turned on. In the default setting,
the output frequency is displayed.
■ Parameter setting
Title
F710
F720
9
*1 For details, refer to the table at the end of this subsection.
■ Reference of setting
With <F710: Standard mode display>, set the contents to be displayed in [Standard mode] on the
operation panel when the power is turned on. Set the extension panel with <F720: Standard mode
display of extension panel>.
In either case, "0: Output frequency" in the default setting.
Memo
5. [Fundamental operation] How to use parameters
Customizing display
Parameter name
Standard mode display
Standard mode display of
extension panel
• Different contents can be displayed on the operation panel of the inverter unit and the extension
panel (optional).
F710 : Standard mode display
0: Output frequency
1: frequency reference
2: Output current
3: DC Bus voltage
4: Output voltage
Adjustment range
*1
0 - 162
*1
0 - 162
5-70
E6582062
STOP 0.0Hz
15:36
Default
setting
0
0