9
Mount the DC reactor cover to the DC reactor and tighten
four screws according to necessity of other work.
After mounting the DC reactor to the inverter, mount the front
cover (upper) before the DC reactor cover.
• After mounting the DC reactor to the inverter, if the DC reactor cover is mounted and fixed, the
Memo
front cover (upper) cannot be mounted. Be sure to mount the front cover (upper) before the DC
reactor cover.
■ With frame size A8
VFAS3-4200KPC to 4280KPC
Except for its wider unit, frame size A8 has the same enclosure and structure as frame size A7.
The mounting procedure of the DC reactor is the same as that of frame size A7, however, more
wires are connected to the inverter unit.
An example of wiring is shown below.
PO PA/+
Earth wire
2-63
E6582062
DC reactor cover
Screw
10
2. Installation and wiring
2
3
9