Configuring Active Directory (Standard Schema And Extended Schema) - Dell iDRAC6 User Manual

Table 5-22. Active Directory Buttons
Button
Print
Refresh

Configuring Active Directory (Standard Schema and Extended Schema)

1 On the Active Directory screen, click Configure Active Directory.
2 On the Step 1 of 4 Active Directory screen, you can either enable
certificate validation, upload the Active Directory CA certificate in
iDRAC6, or view the current Active Directory CA certificate.
Table 5-23 describes the settings and selections for each step in the Active
Directory Configuration and Management process. Click the appropriate
button to continue.
Table 5-23. Active Directory Configuration Settings
Setting
Step 1 of 4 Active Directory Configuration and Management
Certificate Validation
Enabled
Upload Active
Directory CA
Certificate
108
Configuring iDRAC6 Enterprise Using the Web Interface
Definition
Prints the Active Directory values that appear on the screen.
Reloads the Active Directory screen.
Description
Specifies whether Certificate validation is enabled or
disabled. If Checked, Certificate Validation is enabled.
iDRAC6 uses LDAP over Secure Socket Layer (SSL) while
connecting to Active Directory. By default, iDRAC6
provides strong security by using the CA certificate loaded
in iDRAC6 to validate the SSL server certificate of the
domain controllers during SSL handshake. Certificate
validation can be disabled for testing purposes.
To upload an Active Directory CA certificate, click Browse,
select the file, and click Upload. Ensure that the domain
controller's SSL certificates have been signed by the same
CA and that this Certificate is available on the management
station accessing iDRAC6. The File Path value displays the
file path of the certificate you are uploading. If you choose
not to browse to the certificate, enter the file path which
includes the full path and the complete file name and file
extension.