Creating A Bootable Image File - Dell iDRAC6 User Manual

Creating a Bootable Image File

Before you deploy your image file to the remote systems, ensure that a
supported system can boot from the file. To test the image file, transfer the
image file to a test system using iDRAC6 Web user interface and then reboot
the system.
The following sections provide specific information for creating image files
for Linux and Windows systems.
Creating an Image File for Linux Systems
Use the Data Duplicator (dd) utility to create a bootable image file for your
Linux system.
To run the utility, open a command prompt and enter the following:
dd if= <input-device> of= <output-file>
For example:
dd if=/dev/sdc0 of=mycd.img
Creating an Image File for Windows Systems
When choosing a data replicator utility for Windows image files, select a
utility that copies the image file and the CD/DVD boot sectors.
Preparing for Deployment
Configuring the Remote Systems
1 Create a network share that can be accessed by the management station.
2 Copy the operating system files to the network share.
3 If you have a bootable, preconfigured deployment image file to deploy the
operating system to the remote systems, skip this step.
If you do not have a bootable, preconfigured deployment image file, create
the file. Include any programs and/or scripts used for the operating system
deployment procedures.
For example, to deploy a Microsoft
image file may include programs that are similar to deployment methods
used by Microsoft Systems Management Server (SMS).
288
Deploying Your Operating System Using iVMCLI
® ®
Windows operating system, the