Dell iDRAC6 User Manual page 175

Remote access controller 6
Hide thumbs Also See for iDRAC6:
Table of Contents

Advertisement

Firmware Updated — Displays the date and time of the last successful
iDRAC6 firmware update
MAC Address — Displays the MAC address associated with the LOM
(LAN on Motherboard) Network Interface Controller of iDRAC6
IPv4 Settings
Enabled — Displays whether IPv4 protocol support is enabled or disabled
NOTE:
DHCP Enabled — Enabled if iDRAC6 is set to fetch its IP address and
associated info from a DHCP server
IP Address — Displays the IP address associated with iDRAC6 (not the
managed server)
Subnet Mask — Displays the TCP/IP Subnet Mask configured for
iDRAC6
Gateway — Displays the IP address of the network gateway configured for
iDRAC6
Use DHCP to obtain DNS server addresses — Displays whether DHCP is
used to obtain DNS Server Addresses
Preferred DNS Server — Displays the currently active primary DNS server
Alternate DNS Server — Displays the alternate DNS server address
IPv6 Settings
Enabled — Displays whether IPv6 protocol support is enabled or disabled
Autoconfiguration Enabled — Displays whether Autoconfiguration is
enabled or disabled
Link Local Address — Displays the IPv6 address for iDRAC6 NIC
Gateway — Displays the IP address of the network gateway configured for
iDRAC6
Use DHCPv6 to obtain DNS server addresses — Displays whether DHCP
is used to obtain DNS Server Addresses
Preferred DNS Server — Displays the currently active primary DNS server
Alternate DNS Server — Displays the alternate DNS server address
Viewing the Configuration and Health of the Managed Server
The IPv4 protocol option is enabled by default.
175

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents