Racresetcfg - Dell iDRAC6 User Manual

racresetcfg

Table A-15 describes the racresetcfg subcommand.
Table A-15. racresetcfg
Subcommand
racresetcfg
Synopsis
racadm racresetcfg
Supported Interfaces
• Local RACADM
• Remote RACADM
• telnet/ssh RACADM
Description
The racresetcfg command removes all user-configured database property
entries. The database has default properties for all entries that are used to
restore iDRAC6 back to the default settings.
NOTE:
This command deletes your current iDRAC6 configuration, disables DHCP,
and resets iDRAC6 configuration to the default settings. After reset, the default
name and password are root and calvin, respectively, and the IP address is
192.168.0.120 plus the number of the slot the server inhabits in the chassis.
serveraction
Table A-16 describes the serveraction subcommand.
Table A-16. serveraction
Subcommand
serveraction
352
RACADM Subcommand Overview
Definition
Resets the entire iDRAC6 configuration to factory default
values.
NOTE:
The racresetcfg subcommand does not reset the
cfgDNSRacName object.
Definition
Executes a managed server reset or power-on/off/cycle.