Dell iDRAC6 User Manual page 302

Table 19-1. LAN Parameters (continued)
Item
DNS Server 1
DNS Server 2
IPv6 Settings
IPv6
IPv6 Address Source Select between AutoConfig and Static. When AutoConfig is
IPv6 Address 1
Prefix Length
Default Gateway
IPv6 Link-local
Address
IPv6 Address 2-15
DNS Servers from
DHCPv6
DNS Server 1
302
Using iDRAC6 Configuration Utility
Description
If DNS Servers from DHCP is Off, enter the IP address of the
first DNS server.
If DNS Servers from DHCP is Off, enter the IP address of the
second DNS server.
Enable or disable support for the IPv6 connection.
selected, the IPv6 Address 1, Prefix Length, and Default
Gateway fields are obtained from DHCP .
When Static is selected, the IPv6 Address 1, Prefix Length,
and Default Gateway items become editable.
If the IP Address Source is set to AutoConfig, this field
displays the IP address obtained from DHCP .
If the IP Address Source is set to Static, enter the IP address
you want to assign to iDRAC6.
Configures the Prefix length of the IPv6 address. It can be a
value between 1 an 128, inclusive.
If the IP Address Source is set to AutoConfig, this field
displays the IP address of the default gateway obtained from
DHCP .
If the IP Address Source is set to Static, enter the IP address of
the default gateway.
This is the non-editable IPv6 Link-local Address of iDRAC6
network interface.
This is the non-editable IPv6 Address 2...IPv6 Address 15 of
iDRAC6 network interface.
Select On to retrieve DNS server addresses from a DHCP
service on the network. Select Off to specify the DNS server
addresses below.
If DNS Servers from DHCP is Off, enter the IP address of the
first DNS server.