3 Click Add/Remove Snap-in.
4 Select the Active Directory Users and Computers Snap-in and click Add.
5 Click Close and click OK.
Adding iDRAC6 Users and Privileges to Active Directory
Using the Dell-extended Active Directory Users and Computers Snap-in, you
can add iDRAC6 users and privileges by creating iDRAC6, Association, and
Privilege objects. To add each object type, perform the following procedures:
•
Create an iDRAC6 device Object
•
Create a Privilege Object
•
Create an Association Object
•
Add objects to an Association Object
Creating an iDRAC6 Device Object
1 In the MMC Console Root window, right-click a container.
2 Select New→ Dell Remote Management Object Advanced.
The New Object window appears.
3 Enter a name for the new object. The name must be identical to iDRAC6
name that you will enter in Step A of "Configuring Active Directory With
Extended Schema Using iDRAC6 Web Interface."
4 Select iDRAC Device Object.
5 Click OK.
Creating a Privilege Object
NOTE:
A Privilege Object must be created in the same domain as the related
Association Object.
1 In the Console Root (MMC) window, right-click a container.
2 Select New→ Dell Remote Management Object Advanced.
The New Object window appears.
3 Enter a name for the new object.
4 Select Privilege Object.
5 Click OK.
134
Using iDRAC6 With Microsoft Active Directory