Ifconfig - Dell iDRAC6 User Manual

Table A-44. coredumpdelete
coredumpdelete
Synopsis
racadm coredumpdelete
Description
The coredumpdelete subcommand can be used to clear any currently
resident coredump data stored in iDRAC6.
NOTE:
If a coredumpdelete command is issued and a coredump is not
currently stored in iDRAC6, the command will display a success message.
This behavior is expected.
See the coredump subcommand for more information on viewing
a coredump.
Supported Interfaces
• Local RACADM
• Remote RACADM
• telnet/ssh RACADM

ifconfig

NOTE:
To use this command, you must have Execute Diagnostic Commands or
Configure iDRAC6 permission.
Table A-45 describes the ifconfig subcommand.
Table A-45. ifconfig
Subcommand
ifconfig
Synopsis
racadm ifconfig
Deletes the core dump stored in iDRAC6.
Definition
Displays the contents of the network interface table.
RACADM Subcommand Overview
375