Fwupdate - Dell iDRAC6 User Manual

Legal Values
0 = Enable
1 = Disable
Supported Interfaces
• Local RACADM

fwupdate

NOTE:
To use this command, you must have Configure iDRAC6 permission.
Table A-38 describes the fwupdate subcommand.
Table A-38. fwupdate
Subcommand
fwupdate
Synopsis
racadm fwupdate -s
racadm fwupdate -g -u -a < TFTP_Server_IP_Address > [-d
< path >]
racadm fwupdate -p -u -d <path>
racadm fwupdate -r
Description
The fwupdate subcommand allows users to update the firmware on iDRAC6.
The user can:
• Check the firmware update process status
• Update iDRAC6 firmware from a TFTP server by providing an IP address
and optional path
• Rollback to the standby firmware
Definition
Updates the firmware on iDRAC6
RACADM Subcommand Overview
369