Configuring Virtual Media
1 Log in to iDRAC6 Web interface.
2 Click System→ Console/Media→ Configuration.
3 In the Virtual Media section, select values for the settings. See Table 14-2
for information on Virtual Media configuration values.
4 Click Apply to save your settings.
An alert dialog appears with the following message: You are about
to change device configuration. All existing
redirection sessions will be closed. Do you want
to continue?
5 Click OK to continue.
An alert dialog appears with the following message: Virtual Media
Configuration successfully set.
Table 14-2. Virtual Media Configuration Values
Attribute
Attach Virtual Media
Maximum Sessions
Active Sessions
Virtual Media Encryption
Enabled
232
Configuring and Using Virtual Media
Value
Attach — Immediately attaches Virtual Media to the
server.
Detach — Immediately detaches Virtual Media from
the server.
Auto-Attach — Attaches Virtual Media to the server
only when a virtual media session is started.
Displays the maximum number of Virtual Media
sessions allowed. This value is always 1.
NOTE:
Only one virtual media user session is allowed;
however, multiple devices can be attached in a single
session. See "Running Virtual Media."
Displays the number of Virtual Media sessions that
are currently active.
Enables (checked) or disables (not checked)
encryption on Virtual Media connections.