Hitachi TM3030 Plus Instruction Manual page 161

2. When continuing observation, perform the steps described in 4.2.6 Starting Observation
and the following sections. When using any other specimen, exchange the specimens
referring to the steps described in 4.2.2 Loading a Specimen and Adjusting its Height and
the following sections, and then perform observation.
NOTE : When exchanging specimens, and then pressing the EVAC/AIR switch for air
introduction into the specimen chamber, the displayed image on screen will
disappear.
3. Close the application.
3a. Click [X] on the Title bar located in the upper right area of the operation window, or
select [Exit] from the [File] menu.
3b. A termination confirmation dialog appears. Click the [OK] button to close the
application. If not closing the application, click the [Cancel] button.
Figure 4.2.14-2 Application Termination Confirmation Dialog
4 - 42