Image Settings View Function - Hitachi TM3030 Plus Instruction Manual

7.10

Image Settings View Function

This function allows you to specify various settings, such as selecting an image view display
format.
Display data setting
Measurement of roughness
Measurement of distance
1. Condition
Calibration condition
Displays the calibration condition. When clicking the [Condition] area, the Condition table
dialog is displayed.
See 7.22 Calibration of 3D Measurement.
 Calibration condition comment: Displays comments of the calibration condition.
 HV:
Displays an accelerating voltage of the calibration condition.
 Mag:
Displays a magnification of the calibration condition.
 WD:
Displays a working distance (WD) of the calibration condition.
NOTE : The value of "D" that shows the distance from the BSE detector to a specimen is
displayed as "WD (Working distance)" that shows the focal length in 3D-Image
Viewer. The relation of the values of "D" and "WD" is
WD=D  1.5 mm.
Condition
Image Fix
Figure 7.10-1 Image Settings View
7 - 23