Displaying And Editing Base Zero Offset - Siemens SINUMERIK 840D sl Operating Manual

Setting up the machine
4.8 Zero offsets
Work offsets
Programmed WO
Cycle reference
Total WO
T:
WCS actual value
The display of the zero point offsets depends on the settings.
Procedure
4.8.3

Displaying and editing base zero offset

The defined channel-specific and global base offsets, divided into coarse and fine offsets, are
displayed for all set-up axes in the "Zero offset - Base" window.
Procedure
122
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. Select the "Parameter" operating area.
2 Press the "Work offset" and "Overview" softkeys.
The "Work Offsets - Overview" window opens.
Machine manufacturer
Please refer to the machine manufacturer's specifications.
1. Select the "Parameter" operating area.
2. Press the "Zero offset" softkey.
Displays the additional work offsets programmed with
$P_PFRAME.
Displays the additional work offsets programmed with
$P_CYCFRAME.
Displays the active work offset, resulting from the total of all
work offsets.
Displays the active tool.
Displays the actual value in the Workpiece Coordinate Sys‐
tem.
Operating Manual, 05/2017, A5E40868956
Milling