Siemens SINUMERIK 840D sl Operating Manual page 402

Programming technological functions (cycles)
10.2 Milling
Parameters in the "Input simple" mode
G code program parameters
Input
Milling direction
RP Retraction plane
F Feedrate
Parameter Description
Machining The following machining operations can be selected:
● ∇ (roughing)
● ∇∇∇ (finishing)
● ∇∇∇ edge (edge finishing)
● Chamfering
The positions refer to the reference point:
X0 Reference point X
Y0 Reference point Y
Z0 Reference point Z
W Slot width
L Slot length
α0 Angle of rotation
Z1 Slot depth (abs) or depth in relation to Z0 (inc) - (only for ∇, ∇∇∇ and ∇∇∇ edge)
DXY
● Maximum plane infeed
(only for ShopMill)
● Maximum plane infeed as a percentage of the milling cutter diameter
- (only for ∇ and ∇∇∇)
DZ Maximum depth infeed – (only for ∇, ∇∇∇ and ∇∇∇ edge)
UXY Plane finishing allowance - (only for ∇, ∇∇∇ and ∇∇∇ edge)
UZ Depth finishing allowance (slot base) - (only for ∇ and ∇∇∇)
402
● simple
mm
*
ShopMill program parameters
T Tool name
D Cutting edge number
F Feedrate
S / V Spindle speed or constant
cutting rate
Operating Manual, 05/2017, A5E40868956
mm/min
mm/rev
rpm
m/min
mm
mm
mm
mm
mm
Degrees
mm
mm
%
mm
mm
mm
Milling