Context Menu; Touch Operation - Siemens SINUMERIK 840D sl Operating Manual

Introduction
2.4 User interface
Note
Input order for functions
When using the square root or squaring functions, make sure to press the "R" or "S" function
keys, respectively, before entering a number.
2.4.9

Context menu

When you right-click, the context menu opens and provides the following functions:
● Cut
Cut Ctrl+X
● Copy
Copy Ctrl+C
● Paste
Paste Ctrl+V
Program editor
Additional functions are available in the editor
● Undo the last change
Undo Ctrl+Z
● Redo the changes that were undone
Redo Ctrl+Y
Up to 50 changes can be undone.
2.4.10

Touch operation

If you have an operator panel with a touch screen, you can perform the following functions
with touch operation:
Operating area switchover
50
Press the <INPUT> key.
The new value is calculated and displayed in the entry field of the calcu‐
lator.
5. Press the "Accept" softkey.
The calculated value is accepted and displayed in the entry field of the
window.
You can display the operating area menu by touching the display symbol
for the active operating area in the status display.
Operating Manual, 05/2017, A5E40868956
Milling