Siemens SINUMERIK 840D sl Operating Manual page 569

Parameter
U1
Set machining area
limits
XA
XB
ZA
ZB
N
DP
* Unit of feedrate as programmed before the cycle call
Parameters in the "Input simple" mode
G code program parameters
Input
PRG Name of the program to be generated
Milling
Operating Manual, 05/2017, A5E40868956
Description
Compensation allowance in X and Z direction (inc) – (only for allowance)
● Positive value: Compensation allowance is retained
● Negative value: Compensation allowance is removed in addition to finishing
allowance
Set machining area limits
● Yes
● No
With limited machining area only, yes:
1st limit XA ∅
2nd limit XB ∅ (abs) or 2nd limit referred to XA (inc)
1st limit ZA
2nd limit ZB (abs) or 2nd limit referred to ZA (inc)
Number of grooves
Distance between grooves
● simple
Programming technological functions (cycles)
10.5 Contour turning - Milling/turning machine
ShopMill program parameters
T Tool name
D Cutting edge number
S / V Spindle speed or
constant cutting rate
Unit
mm
mm
mm
rpm
m/min
569