Siemens SINUMERIK 840D sl Operating Manual page 415

Procedure
Parameters in the "Input complete" mode
Parameters, G code program
Input
PL Machining plane
RP Retraction plane
SC Safety clearance
F Feedrate
Parameter Description
Reference point Position of the reference point:
● (lefthand edge)
● (center)
● (righthand edge)
Machining ● ∇ (roughing)
● ∇∇ (pre-finishing)
● ∇∇∇ (finishing)
● ∇∇∇ base (base finishing)
● ∇∇∇ edge (edge finishing)
● Chamfering
Milling
Operating Manual, 05/2017, A5E40868956
1. The part program or ShopMill program to be processed has been created
and you are in the editor.
2. Press the "Milling" softkey.
3. Press the "Slot" and "Open slot" softkeys.
The "Open slot" input window opens.
● complete
mm
mm
*
Programming technological functions (cycles)
Parameters, ShopMill program
T Tool name
D Cutting edge number
F Feedrate
S / V Spindle speed or constant cutting
rate
10.2 Milling
mm/min
mm/tooth
rpm
m/min
Unit
415