Saving The Dxf File; Transferring The Drilling Positions - Siemens SINUMERIK 840D sl Operating Manual

Machining the workpiece
6.11 Working with DXF files
6.11.3.6

Saving the DXF file

You can save DXF files that you have reduced and edited.
Requirement
The DXF file is open in the editor.
Procedure
- OR -
6.11.3.7

Transferring the drilling positions

Procedure
196
1. Reduce file according to your requirements and/or select the working
areas.
2. Press the "Back" and ">>" softkeys.
3. Press the "Save DXF" softkey.
4. Enter the required name in the "Save DXF Data" window and press "OK".
The "Save As" window opens.
5. Select the required storage location.
6. If required, press the "New directory" softkey, enter the required name in
the "New Directory" window and press the "OK" softkey to create a direc‐
tory.
7. Press the "OK" softkey.
1. The part program or ShopMill program to be processed has been created
and you are in the editor.
2. Press the "Drilling" softkey.
Operating Manual, 05/2017, A5E40868956
Milling