References
A description of the configuration options is provided in
SINUMERIK Operate / SINUMERIK 840D sl Commissioning Manual
Procedure
See also
Starting and stopping a spindle manually (Page 138)
Table 9-1
Parameter
Stop position
Other M function
Coolant 1
Coolant 2
Tool-spec. function 1
Milling
Operating Manual, 05/2017, A5E40868956
1.
The ShopMill program to be edited has been created and you are in the
editor.
2.
Press the menu forward key and the "Straight Circle" softkey.
3.
Press the "Machine functions" softkey.
The "Machine functions" window opens.
4.
Enter the desired parameters.
5.
Press the "Accept" softkey.
Description
Spindle M function, defines the spindle direction of rotation or spindle position
● Spindle off
●
Spindle rotates clockwise
●
Spindle rotates counterclockwise
●
Spindle positions
Spindle stop position - (only for spindle M function SPOS)
Machine functions, e.g. "Close door" that are additionally provided by the ma‐
chine manufacturer.
Selects coolant (switches coolant 1 on or off)
● with
● without
Selects coolant (switches coolant 2 on or off)
● with
● without
User machine functions on/off
Creating a ShopMill program
9.9 Defining machine functions
Unit
Degrees
289