Creating a ShopMill program
9.18 Example, standard machining
3. Outside contour of the workpiece
4. Outside contour islands
To simply machine the entire surface outside the island, define a contour pocket around the
blank and then program the island. In this way, the entire surface area is machined and no
residual material is left behind.
306
1.
Press the "Milling", "Multi-edge spigot" and "Rectangular spigot" softkeys.
2.
Enter the following technology parameters:
T End_mill_20mm
3.
Enter the following parameters:
Position of reference point
Machining
Type of position
X0
Y0
Z0
W1
L1
W
L
R
α0
Z1
DZ
UXY
UZ
4.
Press the "Accept" softkey.
D1
F 0.140 mm/tooth
Roughing (∇)
Single position
0abs
0abs
0abs
185(fictitious blank dimension)
185(fictitious blank dimension)
180abs
180abs
10abs
0degrees
20inc
5
0
0
Operating Manual, 05/2017, A5E40868956
V 240 m/min
Milling