Creating a ShopMill program
9.16 Calling technology functions
9.16
Calling technology functions
9.16.1
Additional functions in the input screens
Selection of units
Display of abs or inc
The abbreviations "abs" and "inc" for absolute and incremental values are displayed behind
the entry fields when a switchover is possible for the field.
Help screens
2D and 3D graphics or sectional views are displayed for the parameterization of the cycles.
Online help
If you wish to obtain more detailed information about certain G code commands or cycle
parameters, then you can call a context-sensitive online help.
9.16.2
Checking input parameters
When generating the program, the parameters that are entered are already checked in order
to avoid making incorrect entries.
300
⇒
A menu tree with all of the available measuring versions of the measuring
cycle function "Measure workpiece" can be found in the following reference:
Programming Manual Measuring cycles / SINUMERIK 840D sl/828D
⇒
A menu tree with all of the available measuring versions of the measuring
cycle function "Measure tool" can be found in the following reference:
Programming Manual Measuring cycles / SINUMERIK 840D sl/828D
If, for example, the unit can be switched in a field, this is highlighted as soon as the cursor
is positioned on the element. In this way, the operator recognizes the dependency.
The selection symbol is also displayed in the tooltip.
Operating Manual, 05/2017, A5E40868956
Milling