External Connections - Toshiba GRT100 Series Instruction Manual

the high reliability and long life for which the equipment has been designed and manufactured.
CAUTION
 Before removing a module, ensure that you are at the same electrostatic potential as the
equipment by touching the case.
 Handle the module by its front plate, frame or edges of the printed circuit board. Avoid
touching the electronic components, printed circuit board or connectors.
 Do not pass the module to another person without first ensuring you are both at the same
electrostatic potential. Shaking hands achieves equipotential.
 Place the module on an anti-static surface, or on a conducting surface which is at the same
potential as yourself.
 Do not place modules in polystyrene trays.
It is strongly recommended that detailed investigations on electronic circuitry should be carried
out in a Special Handling Area such as described in the IEC 60747.

5.5 External Connections

External connections are shown in Appendix G.
 106 
6 F 2 S 0 7 8 9