Postfailure - HP 54501A Programming Reference Manual

POSTfailure
POSTfailure
command/query
The
:MEASURE:POSTFAILURE
command specifies what will occur
after
a
violation has
been found by the limit
test.
If CONTINUE
is
selected, the instrument will continue to look for
another
violation.
If
STOP is selected the instrument will stop the limit test.
If CONTINUE
is
selected and
a
violation
is found the violation will be
written
to the desired location.
If
a
waveform memory
is
selected
as
the
destination then all subsequent violations will overwrite the previous
violation.
The
POSTFAILURE
query returns the current
selection.
Command
Syntax: :MEASure:POSTfailure {CONTinue |
STOP}
Example:
OUTPUT 707;":MEAS: POST"
Query Syntax:
:MEASure:POSTfailure?
Returned Format: l:MEASure:POST<ailure]
{CONTinue
| STOP}<NL>
Example: DIM
pf$[50]
OUTPUT
707;":MEASURE: POSTFAILURE?"
ENTER
707; Pf$
PRINT Pf$
Measure Subsystem
14-32
HP
54501A
Programming