Delay - HP 54501A Programming Reference Manual

DELay
DELay
command/query
The
:TIMEBASE:DELAY
command sets
the timebase delay. This delay
is
the time interval between the
trigger event and the
on screen
delay
reference
point.
The
delay reference point
is the left edge
of
the display,
the right edge
of the
display, or center
of
the display, and is set
with the
:TIMEBASE:REFERENCE
command.
The
DELAY query returns the current delay value.
Command
Syntax:
:TIMebase: DELay
<delay>
Where:
<
delay
>
::= timein seconds from trigger to on screen delay reference point.
Maximum value depends
on
time/division setting.
Example:
OUTPUT 707;":TIM:DEL 2MS"
Query Syntax:
:TIMebase:DELay?
Returned Format: [:TIMebase:DELay]
<delay>
<NL>
Where:
<
delay
>
:: =
time from
trigger to display
reference
in
seconds. Display
reference is
left,
center, or right (exponential
•
NR3 format)
Example: DIM Di$(50]
OUTPUT 707; ":TIMEBASE: DELAY?"
ENTER 707;
Dl$
PRINT Dl$
HP 54501A
Programming
Timebase Subsystem
15-3