Windowdelay - HP 54501A Programming Reference Manual

WINDow:DELay
WINDOW: DELay
(Position)
command/query
The
:TIMEBASE:WINDOW:DELAY
command
sets
the timebase
window
delay. The window
delay actually
sets
the position of the timebase
window
on the
main sweep.
The range for this command is determined by
the
main
sweep seconds/division and
delay
values.
The
value for
this
command must
keep
the window on the
main
sweep
display.
The
WINDOW:DELAY
query returns the current value.
Command
Syntax:
:TIMebase:WINDow:DELay <wid_delay>
Where:
<wid_delay>
::
=
time in
seconds from
trigger to on screen
delay reference
point.
Maximum value depends
on time/division setting.
Example:
OUTPUT 707;":TIM:WIND:DEL 20 NS"
Query Syntax:
:TIMebase:WINDow:DELay?
Returned Format:
(:TIMebase:WINDow:DELay]
<wid_delayxNL>
Where:
<wid_delay> ::
=
current setting
in
seconds (exponential
-
NR3 format)
Example:
DIM Diy$[50]
OUTPUT 707;":TIMEBASE:WINDOW:DELAY?"
ENTER 707; Dly$
PRINT Dly$
Timebase Subsystem
15-8
HP 54501A
Programming